在庫あり 注目商品
UHLT1005A
UHLT1005A HLT1005A HL-T1005A PANASONIC HL-T1 sensor heads, 5 mm type
$0.00米ドル
3084 在庫あり
主な仕様
アイテム:Specifications
タイプ:Sensing width 5 mm0.197 intype
ケーブル:0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong
重さ:Emitter: 15 g approx.Receiver: 15 g approx.
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| タイプ | Sensing width 5 mm0.197 intype |
| ケーブル | 0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong |
| 重さ | Emitter: 15 g approx.Receiver: 15 g approx. |
| 詳細 | Sensor head (Sensing width 5 mm0.197 intype) |
| 製品 | Ultra-compact Laser Collimated Beam Sensor |
| 材料 | Enclosure: PolyetherimideCase cover: PolycarbonateFront cover: Glass |
| アクセサリー | MS-HLT1-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiverCN-HLT1-1(Sensor head to controller connection cable): 1 cableLaser beam alignment sticker: 2 pcs.Label set (FDA regulations conformed type only): 1 set |
| 部品番号 | HL-T1005A |
| 製品名 | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
| 検知範囲 | ■■【In the case of(0 to 500 mm 0to 19.685 in)】■■Sensing width:ø1 mmø0.039 inMin. sensing object:ø8 micro mø0.315 milopaque objectRepeatability (During the state in which light is half blocked):4 micro m0.157 mil(Note：In case of an average sampling rate of 64 times.)Linear output resolution:4 micro m0.157 mil(Note) In case of an average sampling rate of 64 times.(Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width.(Note：This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mmø0.039 in.)■■【In the case of (500 to 2,000 mm19.685 to 78.74 in)】■■Sensing width:ø1 to ø2.5 mmø0.039 to ø0.098 inMin. sensing object:ø50 micro mø1.969 milopaque objectRepeatability (During the state in which light is half blocked): -Linear output resolution: -- |
| 製品番号 | HL-T1005A |
| ケーブル延長 | Extension up to total 10 m32.808 ftis possible, with the optional cable. |
| 汚染度 | 3 (industrial environment) |
| 排出指標 | Green LED (lights up during laser emission) |
| 適用可能なコントローラー | HL-AC1, HL-AC1P |
| 絶縁抵抗 | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| CEマーキング指令への準拠 | EMC Directive, RoHS Directive |
| 干渉防止機能 | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| 耐環境性：周囲湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 耐環境性：耐衝撃性 | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| 耐環境性：周囲照度 | Incandescent light: 10,000 liter x or less at the light-receiving face |
| 耐環境性：周囲温度 | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| 耐環境性：耐振動性 | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| 発光素子：FDA規制適合型 | Red semiconductor laser Class II (FDA)(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil)(IEC / JIS: Class 1) |
| 発光素子：IEC/JIS規格適合型 | Red semiconductor laser Class 1 (IEC / JIS)(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil) |
製品説明
HLT1 Series Analog Barrier Laser Emitter-Clevy, 5mm Beam Width, 500mm Range
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
