在庫あり 注目商品
ULS401C2
ULS401C2 LS401C2 LS-401-C2 PANASONIC Laser Amplifier (with display), cable 2m, 2 outputs NPN
$0.00米ドル
3847 在庫あり
主な仕様
アイテム:Specifications
ケーブル:0.15 mm25-core cabtyre cable, 2 m6.562 ftlong
重さ:Net weight: 65 g approxGross weight: 75 g approx
詳細:Amplifier (Cable type)
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | 0.15 mm25-core cabtyre cable, 2 m6.562 ftlong |
| 重さ | Net weight: 65 g approxGross weight: 75 g approx |
| 詳細 | Amplifier (Cable type) |
| 製品 | Digital Laser Sensor |
| 材料 | Enclosure: Heat-resistant ABSTransparent cover: PolycarbonatePush button switch: AcrylicJog switch: ABS |
| 部品番号 | LS-401-C2 |
| 製品名 | Digital Laser Sensor LS-400 |
| 応答時間 | 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch |
| モードインジケーター | RUN: Green LEDTEACH, L/D, TIMER, CUST, PRO: Yellow LED |
| 製品番号 | LS-401-C2 |
| 供給電圧 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| タイマー機能 | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. |
| ケーブル延長 | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| デジタル表示 | 4 digit (green) + 4 digit (red) LED display |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| インジケーターを選択 | Yellow LED(lights up when either output 1 or output 2 is selected) |
| 耐衝撃性 | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| 周囲温度 | -10 to +55 ℃+14 to +131 ℉(If 4 to 7 units are mounted close together: -10 to +50 ℃+14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃+14 to +113 ℉)(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| 消費電流 | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
| 操作インジケーター | Orange LED (lights up when output 1 and output 2 are ON) |
| 感度設定 | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustmentWindow comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentHysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentDifferential mode: 5-level settings |
| タイマー機能:時間 | 1 to 9,999 ms |
| 耐振動性 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| レーザー発光インジケーター | Green LED (lights up during laser emission) |
| 耐電圧性 | 1,000 V AC for one min.between all supply terminals connected together and enclosure |
| 出力（出力1、出力2） | NPN open-collector transistor- Maximum sink current: 100 mA (Note)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less [at 100 mA (Note) sink current](Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade. |
| 微調整機能 | Incorporated |
| 自動干渉防止機能 | Incorporated[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)] |
| 出力（出力1、出力2）：出力操作 | Selectable either Light-ON or Dark-ON, with jog switch |
| 出力（出力1、出力2）：短絡保護 | Incorporated |
| 外部入力（レーザー発光停止フルオートティーチング/リミットティーチング） | NPN non-contact input- Signal conditionHigh: +5 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
製品説明
LS400 series digital laser amplifier, NPN, 2m cable
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
