

| パラメータ | 価値 |
|---|---|
| 6 kV (Safe isolation and reinforced insulation between input circuit and output contact paths) | |
| 色 | green (RAL 6021) |
| 深さ | 62 mm |
| ピッチ | 2.54 mm |
| 幅 | 285.5 mm |
| 身長 | 112 mm |
| 製品タイプ | Interface module |
| ねじ山 | M3 |
| 組み立てノート | in rows with zero spacing |
| 取り付けタイプ | DIN rail mounting |
| 動作モード | 100% operating factor |
| チャンネル数 | 32 |
| コンポーネント付き | yes |
| 記事の改訂 | 06 |
| 接触材料 | AgNi |
| 汚染度 | 2 |
| 剥ぎ取り長さ | 8 mm |
| 接続方法 | IDC/FLK pin strip |
| 取り付け位置 | any |
| 適切なI/Oカード | QY82P |
| 操作上の注意 | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| 保護回路 | Free-wheeling diode (integrated in relay) |
| 入力電圧範囲 | 21.6 V DC ... 26.4 V DC |
| ポジション数 | 50 |
| 定格サージ電圧 | 4 kV (Basic insulation between output contact current paths) |
| 保護の程度 | IP00 |
| 過電圧カテゴリー | III |
| 典型的なリリース時間 | 6 ms |
| 接続数 | 1 |
| 規格・規制 | DIN EN 50178 |
| 典型的な応答時間 | 9 ms |
| 接点スイッチングタイプ | 1 changeover contact |
| 最小スイッチング電流 | 10 mA |
| ステータス表示あり | Yes |
| ステータス表示/チャンネル | Yellow LED (integrated in relay) |
| スイッチ接点の種類 | Single contact |
| 機械の耐用年数 | 5x 106cycles |
| 公称入力電圧 UN | 24 V DC |
| 定格絶縁電圧 | 260 V AC |
| 最大スイッチング電圧 | 250 V AC/DC |
| 最小スイッチング電圧 | 12 V AC/DC |
| 動作電圧表示 | Green LED |
| 導体断面積 AWG | 24 ... 12 |
| 連続電流の制限 | 5 A |
| UNでの標準入力電流 | 18 mA |
| 導体断面積は剛性 | 0.2 mm² ... 4 mm² |
| 周囲温度(動作) | -20 °C ... 50 °C |
| 導体断面積が柔軟 | 0.2 mm² ... 2.5 mm² |
| 遮断定格(抵抗負荷)最大。 | 120 W (24 V DC) |
| UNを基準とした入力電圧範囲 | 0.9 ... 1.1 (observe derating) |
| 周囲温度(保管/輸送) | -20 °C ... 70 °C |
技術仕様と性能データ
設置・操作ガイド