

| パラメータ | 価値 |
|---|---|
| 深さ | 146 mm |
| 幅 | 61 mm |
| 身長 | 126 mm |
| 高度 | ≤ 2000 m |
| 絶縁 | Reinforced insulation |
| 製品タイプ | Relay Module |
| 取り付けタイプ | DIN rail mounting |
| コンポーネント付き | yes |
| 汚染度 | 2 |
| 接続方法 | IDC/FLK pin strip |
| 取り付け位置 | any |
| 操作上の注意 | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| ポジション数 | 14 |
| 定格サージ電圧 | 6 kV (1.2/50 μs) |
| 保護の程度 | IP00 |
| 過電圧カテゴリー | III |
| 接続数 | 1 |
| 規格・規制 | DIN EN 50178: 1998-04 |
| 接点スイッチングタイプ | Single contact, 1 changeover contact |
| 公称入力電圧 UN | 24 V DC (±10 %) |
| 定格絶縁電圧 | 260 V |
| 最大スイッチング電圧 | 150 V AC/DC (Maximum switching voltage of 230 V AC: the maximum switching voltage of 230 V is only permitted if the same fuse circuit is used. The outputs are not suitable for switching different outer conductors.) |
| 導体断面積 AWG | 24 ... 12 |
| 連続電流の制限 | 4 A |
| UNでの標準入力電流 | 200 mA (200 mA supply / ≤ 20 mA input current per signal) |
| 導体断面積は剛性 | 0.2 mm² ... 2.5 mm² |
| 周囲温度(動作) | -20 °C ... 50 °C |
| 導体断面積が柔軟 | 0.2 mm² ... 2.5 mm² |
| 標準に準拠した接続 | IEC 60603-13 |
| 保護等級(設置場所) | ≥ IP54 (Installation location) |
技術仕様と性能データ
設置・操作ガイド