

| パラメータ | 価値 |
|---|---|
| TDIL11 (redundant) | |
| 深さ | 66 mm |
| 幅 | 344 mm |
| 身長 | 126 mm |
| 高度 | ≤ 2000 m |
| 絶縁 | Functional insulation |
| 製品タイプ | Interface module |
| ねじ山 | M3 |
| 組み立てノート | in rows with zero spacing |
| 取り付けタイプ | DIN rail mounting |
| 動作モード | 100% operating factor |
| チャンネル数 | 16 |
| 記事の改訂 | 04 |
| 接触材料 | Ag alloy, hard gold-plated |
| 汚染度 | 2 |
| 剥ぎ取り長さ | 8 mm |
| 接続方法 | D-SUB pin strip |
| 取り付け位置 | any |
| 適切なI/Oカード | TDIL01 (non-redundant) |
| 操作上の注意 | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| 保護回路 | Fuse |
| 入力電圧範囲 | 40.8 V DC ... 52.8 V DC |
| ポジション数 | 37 |
| 定格サージ電圧 | 0.6 kV (1.2/50 μs) |
| 保護の程度 | IP00 |
| 過電圧カテゴリー | II |
| 典型的なリリース時間 | 7 ms |
| 接続数 | 1 |
| 規格・規制 | EN IEC 60664-1 |
| 典型的な応答時間 | 5 ms |
| 接点スイッチングタイプ | 1 N/O contact |
| 最小スイッチング電流 | 1 mA (10 mA with damaged gold coating) |
| ステータス表示あり | Yes |
| ステータス表示/チャンネル | Yellow LED |
| スイッチ接点の種類 | Single contact |
| 機械の耐用年数 | approx. 2x 107cycles |
| 公称入力電圧 UN | 48 V DC |
| 定格絶縁電圧 | 63 V |
| 最大スイッチング電圧 | 36 V DC (60 V DC with damaged gold coating) |
| 最小スイッチング電圧 | 100 mV (12 V DC with damaged gold coating) |
| 導体断面積 AWG | 24 ... 12 |
| 連続電流の制限 | 50 mA (500 mA with damaged gold coating) |
| UNでの標準入力電流 | 6.5 mA |
| 導体断面積は剛性 | 0.2 mm² ... 4 mm² |
| 周囲温度(動作) | -15 °C ... 50 °C |
| 導体断面積が柔軟 | 0.2 mm² ... 2.5 mm² |
| 遮断定格(抵抗負荷)最大。 | 1.2 W (at 24 V DC) |
| UNを基準とした入力電圧範囲 | 0.85 ... 1.1 |
| 周囲温度(保管/輸送) | -15 °C ... 50 °C |
| 保護等級(設置場所) | ≥ IP54 (Installation location) |
技術仕様と性能データ
設置・操作ガイド