


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | - |
| 出力 | NPN open-collector transistorMaximum sink current: 100 mAApplied voltage: 30 V DC or less (between output and 0 V)Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| 重さ | Net weight: 4 g approx.Gross weight: 80 g approx.(10 piece package) |
| 詳細 | Connector type L type(Top sensing) |
| 製品 | Convergent Reflective Micro Photoelectric Sensor PM2 |
| 材料 | Enclosure: Polycarbonate, Terminal part: HSM (Ag plated) |
| ヒステリシス | 20 % or less of operation distance with white non-glossy paper(15 × 15 mm0.591 × 0.591 in) |
| 部品番号 | PM2-LL10B |
| ケーブル長 | Total length up to 2 m6.562 ftis possible with 0.3 mm2, or more, cable.(If the cable is extended for 2 m6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.) |
| 製品名 | Convergent Reflective Micro Photoelectric Sensor PM2 |
| 応答時間 | 0.8 ms or less |
| 検知範囲 | 2.5 to 8 mm0.098 to 0.315 in(Conv. point: 5 mm0.197 in) with white non-glossy paper (15 × 15 mm0.591 in × 0.591 in)(Note)The sensing range may extend up to 12.5 mm0.492 inwith white non-glossy paper due to product variation. |
| 製品番号 | PM2-LL10B |
| 供給電圧 | 5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less |
| 周囲の湿度 | 45 to 85 % RH, Storage: 45 to 85 % RH |
| 発光要素 | Infrared LED (Peak emission wavelength: 880 nm0.035 mil, modulated) |
| 汚染度 | 3 (Industrial environment) |
| 耐衝撃性 | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| 周囲照度 | Incandescent light: 3,500 lx or less at the light-receiving face |
| 周囲温度 | –10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: –25 to +80 ℃–13 to +176℉ |
| 消費電流 | Average: 25 mA or less, Peak: 80 mA or less |
| 操作インジケーター | Red LED (lights up when the output is ON) |
| 耐振動性 | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| CEマーキング指令 | EMC Directive, RoHS Directive |
| 最小検知対象 | ø0.05 mmø0.002 incopper wire (Setting distance: 5 mm0.197 in) |
| 出力:利用カテゴリ | DC-12 or DC-13 |
| 出力:過電流保護 | Incorporated |
| 繰り返し精度(センシング軸に垂直) | 0.08 mm0.003 inor less(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm0.591 × 0.591 in) at a setting distance of 5 mm0.197 in. |
技術仕様と性能データ
設置・操作ガイド