在庫あり 注目商品
USGP1020MP
USGP1020MP SG-P1020-M-P PANASONIC Door Safety Switch, Cat.4, RFID, Visible Type, Master (Std), Common Code, ..
$0.00米ドル
4511 在庫あり
主な仕様
アイテム:Specifications
ケーブル:6–core cabtyre cable, 5 m16.404 ftlong
述べる:Where measurement conditions have not been specified precisely, the conditions used were ambient temperature +23 ℃+73 ℉.■Transponder specificationsOperating frequency: 125 kHzMax. transmitter output: 3.33 μW
重さ:Switch body (standard): 180 g approx., Actuator : 20 g approx.
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | 6–core cabtyre cable, 5 m16.404 ftlong |
| 述べる | Where measurement conditions have not been specified precisely, the conditions used were ambient temperature +23 ℃+73 ℉.■Transponder specificationsOperating frequency: 125 kHzMax. transmitter output: 3.33 μW |
| 重さ | Switch body (standard): 180 g approx., Actuator : 20 g approx. |
| 詳細 | Visible type(Low code / Standard) |
| 製品 | Non-Contact Safety Door Switch |
| 材料 | Switch body: PBT, PC, SUS (stainless steel), EPDMActuator: PBT, PC |
| 部品番号 | SG-P1020-M-P |
| 総重量 | 270 g approx. |
| 製品名 | Non-Contact Safety Door Switch SG-P |
| 電源電圧 | 24V DC+10-20％ Ripple P-P 10 % or less |
| 応答時間 | • For single unit: ON→OFF 100 ms or less, OFF→ON 100 ms or less• For multiple units: Time for single unit + 5 ms x (number of connected units - 1) |
| 製品番号 | SG-P1020-M-P |
| 汚染度 | 3 |
| 消費電流 | 30 mA or less |
| 入力と出力を確認する | Dedicated communication line between the switch body (standard) and the switch body (sub) (Note)* It is not for external input and output. (voltage range 0 V to 5 V DC)(Note) : When using the device as a single unit, connect the check input with the check output. |
| 接続ケーブルの長さ | • When using only one unit: Maximum cable length of 20 m 65.617 ft between switch body and power supply unit• When connecting multiple units in series: Maximum total cable length of 100 m328.084 ft, maximum cable length of 20 m65.617 ftbetween two adjacent units |
| 適用規格：日本 | JIS B 9705-1, JIS C 0508-1 to 3 (SIL3), JIS B 9961, JIS C 8201-5-2, JIS B 9710 |
| 適用規格:ヨーロッパ | EN ISO 13849-1 : 2015 (Category 4, PLe), EN ISO 14119, EN 60947-5-3, EN 300 330, EN IEC 63000, EN 301 489-1 |
| 制御出力（OSSD 1、OSSD 2） | PNP open-collector transistor 2 outputs• Maximum source current: 100 mA• Applied voltage: Same as the power supply voltage (PNP output: between control output and +V)• Residual voltage: 2 V or less (source current and sink current: 100 mA) (excluding voltage drop due to cable)• Leakage current: 0.2 mA or less (including power OFF state)• Maximum load capacity: 0.47 μF• Load wiring resistance: 3 Ω or less |
| 作動距離：前方/側面 | Sao (OFF→ON): 5 mm0.197 in, Sar (ON → OFF): 15 mm0.591 in |
| 適用規格:北米 | CAN/CSA C22.2 No.14, UL508 |
| 直列接続されたユニットの数 | 30 units or less (standard 1 unit, sub 29 units) |
| 制御出力(OSSD):保護回路 | Incorporated |
| 適用される規制と認証 | CE Marking (Machinery Directive, RE Directive, RoHS Directive), UKCA Marking (Supply of Machinery (Safety) Regulations, RE Regulations, RoHS Regulations), TÜV SÜD certification, TÜV SÜD certification (U.S.A., Canada), the U.S.'s radio regulations (FCC) (Note), Canada's radio regulations (ICES-003, RSS-310) (Note), Singapore's radio regulations (IMDA certification) (Note), Thailand's radio regulations (NBTC certification) (Note), Philippines' radio regulations (NTC certification) (Note), Korea's radio regulations (KC certification) (Note), India's radio regulations (WPC certification) (Note)(Note) : This product uses a weak radio signal for its detection operation. Please confirm compliance with applicable laws in the country of use. |
| 環境耐性:周囲湿度 | 30 to 85 % RH, storage: 30 to 95 % RH |
| 耐環境性：耐衝撃性 | 300 m/s2(approx. 30 G), 3 times each in X, Y, and Z direction |
| 適用規格：国際規格 | ISO 13849-1 : 2015 (Category 4, PLe), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), IEC 60947-5-3, ISO 14119 |
| 耐環境性:周囲温度 | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| 環境耐性：保護等級 | IP65（IEC） |
| 耐環境性：耐振動性 | 10 to 55Hz, 1 mm double amplitude, 2 hours each in X, Y, and Z directions |
| 耐環境性：絶縁抵抗 | 20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| 制御出力（OSSD 1、OSSD 2）：動作モード | • When the actuator is detected (safe state): ON• When the actuator is not detected (unsafe state or lockout state): OFF• When the switch body (sub) does not detect actuator (series connection): OFF |
| 耐環境性：耐電圧性 | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
製品説明
SG-P1020-M-P_Non-Contact Safety Door Switch_Non-Contact Safety Door Switch SG-P_Visible type(Low code / Standard)
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
