在庫あり 注目商品
HC-M-02-MOD-ST
HC-M-02-MOD-ST 1679346 PHOENIX CONTACT HEAVYCON contact insert module, male, 2-pos., axial screw connection
$0.00米ドル
4329 在庫あり
主な仕様
:Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.
幅:34.2 mm
身長:41.8 mm
長さ:14.6 mm
サプライヤー情報
製品: 0
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. | |
| 幅 | 34.2 mm |
| 身長 | 41.8 mm |
| 長さ | 14.6 mm |
| シリーズ | HC-M-02 |
| 一般的な | For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required |
| 応用 | Power |
| 製品タイプ | Modular contact insert |
| 組み立てノート | - Connection of the wires using a 2 mm Allen wrench.- Housing height ≥ 52 mm.- Axial screw connection only for flexible wires.- Plug-in connections may only be operated only when there is no load/voltage. |
| 定格電流 | 40 A |
| 接触材料 | Copper alloy |
| 六角ソケット | SW 2 |
| 連絡先番号 | 1 - 2 |
| 締め付けトルク | 1.5 Nm (2.5 mm² ... 4 mm²) |
| 接続プロファイル | 2 |
| 汚染度 | 3 |
| 寸法図 | |
| ポジション数 | 2 |
| 定格サージ電圧 | 8 kV |
| 過電圧カテゴリー | III |
| 接続技術 | Axial screw connection |
| 定格電圧（III/3） | 1000 V |
| モジュールスロットの数 | 1 |
| 導体断面積 | 2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| 接触キャリア材料 | PC |
| 接触面材質 | Ag |
| 挿入/離脱サイクル | ≥ 500 |
| 接続断面積AWG | 12 ... 10 |
| 周囲温度（動作） | -40 °C ... 125 °C |
| 標準に準拠した接続 | IEC / EN |
| UL 94準拠の難燃性評価 | V0 |
| 個々の電線の被覆剥き長さ | 8 mm +1 mm (for 6 mm²) |
製品説明
More details
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
