


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| 出力 | Relay contact 1a- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour) |
| 重さ | Net weight: 100 g approx. |
| 詳細 | Multi-voltage [With timer] |
| 製品 | Adjustable Range Reflective Photoelectric Sensor |
| 材料 | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| アクセサリー | Adjusting screwdriver: 1 pc. |
| ヒステリシス | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| 保護 | IP67 (IEC) |
| 部品番号 | EQ-502T |
| ケーブル長 | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| 製品名 | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| センシングモード | - |
| 応答時間 | 20 ms or less (depends on the setting timer period) |
| 製品番号 | EQ-502T |
| 供給電圧 | 24-240 V AC ±10 % or 12 to 240 V DC ±10 %Ripple P-P 10 % or less |
| タイマー機能 | Incorporated with variable (0.1 to 5 sec.) ON-delay/OFF-delay timer |
| 調整可能な範囲 | 0.2 to 1.0 m0.656 to 3.281 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 発光要素 | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| 耐衝撃性 | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| 接続方法 | Screw-on terminal connection |
| 距離調整器 | 2-turn mechanical adjuster with indicator |
| 受信要素 | 2-segment photodiode |
| 周囲照度 | Incandescent light: 3,000 Lx or less at the light-receiving face |
| 周囲温度 | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| 操作インジケーター | Orange LED (lights up when the output is ON) |
| 安定性インジケーター | Green LED (lights up under stable operating condition) |
| 耐振動性 | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts |
| 出力:出力操作 | Switchable either Detection-ON or Detection-OFF |
| 耐電圧性 | 2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts |
| 電力/消費電流 | AC: 5 VA or lessDC: 4 W or less |
| CEマーキング指令への準拠 | Low Voltage Directive, EMC Directive, RoHS Directive |
| 出力:短絡保護 | - |
| 自動干渉防止機能 | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| 検知範囲(最大設定距離時) | 0.1 to 1.0 m0.328 to 3.281 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
技術仕様と性能データ
設置・操作ガイド