在庫あり 注目商品
UFX101PZ
UFX101PZ FX101PZ FX-101P-Z PANASONIC Fiber amplifier, Standard type, PNP, display, M8-connector type
$0.00米ドル
4802 在庫あり
主な仕様
アイテム:Specifications
出力:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 100 mA source current)
重さ:Net weight: 15 g approx.Gross weight: 35 g approx.
詳細:Standard type
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| 出力 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 100 mA source current) |
| 重さ | Net weight: 15 g approx.Gross weight: 35 g approx. |
| 詳細 | Standard type |
| 製品 | Digital Fiber Sensor |
| 材料 | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| アクセサリー | FC-FX-1(Protection cover): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| 部品番号 | FX-101P-Z |
| ケーブル長 | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| 製品名 | Digital Fiber Sensor FX-100 |
| 応答時間 | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| 外部入力 | PNP non-contact input- Signal conditionHigh: +4 V to +V DC (Sink current 0.5 to 3 mA)Low: 0 to +0.6 V DC or Open- Input impedance: 10 kOhm approx. |
| 製品番号 | FX-101P-Z |
| 供給電圧 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| タイマー機能 | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| デジタル表示 | 4 digits (green) + 4 digits (red) LCD display |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 耐衝撃性 | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| 接続方法 | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| 消費電力 | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| 周囲照度 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 周囲温度 | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| 操作インジケーター | Orange LED (lights up when the output is ON) |
| 感度設定 | 2-point teaching / Limit teaching / Full-auto teaching |
| 耐振動性 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 出力:出力操作 | Selectable either Light-ON or Dark-ON, at SET mode |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 発光素子（変調） | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CEマーキング指令への準拠 | EMC Directive, RoHS Directive |
| 出力:短絡保護 | Incorporated |
| 排出量設定機能 | 3-level + Auto setting (from production in December 2007) |
| 干渉防止機能 | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| 微調整機能 | Incorporated |
製品説明
FX100 Amplifier F. Optical, PNP output, includes M8 connector
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
