在庫あり 注目商品
UFX102PCC2
UFX102PCC2 FX102PCC2 FX-102P-CC2 PANASONIC Fiber amplifier, Long sensing range type, PNP, display, connector..
$0.00米ドル
3224 在庫あり
主な仕様
アイテム:Specifications
出力:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 100 mA source current)
重さ:Net weight: 15 g approx.Gross weight: 75 g approx.
詳細:Long sensing range type [Cable set]
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| 出力 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 100 mA source current) |
| 重さ | Net weight: 15 g approx.Gross weight: 75 g approx. |
| 詳細 | Long sensing range type [Cable set] |
| 製品 | Digital Fiber Sensor |
| 材料 | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| アクセサリー | FC-FX-1(Protection cover): 1 pc. (Note)CN-14A-C2 (Connector attached cable, 2 m6.562 ftlong): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| 部品番号 | FX-102P-CC2 |
| ケーブル長 | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| 製品名 | Digital Fiber Sensor FX-100 |
| 応答時間 | Emission frequency 1: 2.5 ms or less (factory default setting)Emission frequency 2: 2.8 ms or lessEmission frequency 3: 3.2 ms or lessEmission frequency 4: 5.0 ms or less |
| 外部入力 | PNP non-contact input- Signal conditionHigh: +4 V to +V DC (Sink current 0.5 to 3 mA)Low: 0 to +0.6 V DC or Open- Input impedance: 10 kOhm approx. |
| 製品番号 | FX-102P-CC2 |
| 供給電圧 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| タイマー機能 | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| デジタル表示 | 4 digits (green) + 4 digits (red) LCD display |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 耐衝撃性 | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| 接続方法 | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| 消費電力 | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| 周囲照度 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 周囲温度 | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| 操作インジケーター | Orange LED (lights up when the output is ON) |
| 感度設定 | 2-point teaching / Limit teaching / Full-auto teaching |
| 耐振動性 | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 出力:出力操作 | Selectable either Light-ON or Dark-ON, at SET mode |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 発光素子（変調） | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CEマーキング指令への準拠 | EMC Directive, RoHS Directive |
| 出力:短絡保護 | Incorporated |
| 排出量設定機能 | 3-level + Auto setting (from production in December 2007) |
| 干渉防止機能 | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2, 3 or 4)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values. |
| 微調整機能 | Incorporated |
製品説明
FX100 Amplifier F. Long distance optics, PNP output, includes cable CN14AC2
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
