在庫あり 注目商品
UFX311
UFX311 FX311 FX-311 PANASONIC Fiber amplifier, NPN, 12-turn potentiometer, connector type
$0.00米ドル
3001 在庫あり
主な仕様
アイテム:Specifications
出力:NPN open-collector transistor• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
重さ:Net weight: 15 g approx., Gross weight: 20 g approx.
詳細:NPN output
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| 出力 | NPN open-collector transistor• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)] |
| 重さ | Net weight: 15 g approx., Gross weight: 20 g approx. |
| 詳細 | NPN output |
| 製品 | Manually Set Fiber Sensor |
| 材料 | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate |
| 部品番号 | FX-311 |
| ケーブル長 | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| 製品名 | Manually Set Fiber Sensor FX-311 |
| 応答時間 | 250 μs or less (STD / S-D), 2 ms or less (LONG) selectable with selection switch |
| 製品番号 | FX-311 |
| 供給電圧 | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| タイマー機能 | Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 耐衝撃性 | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| 接続方法 | Connector(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft) |
| 消費電力 | 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage) |
| 周囲照度 | Incandescent light: 3,000 ℓx at the light-receiving face |
| 周囲温度 | -10 to +55 ℃ -14 to +131 ℉(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)Storage: -20 to +70 ℃ -4 to +158 ℉ |
| 操作インジケーター | Orange LED (lights up when the output is ON) |
| 安定性インジケーター | Green LED (lights up under stable light received condition or stable dark condition) |
| 感度調整器 | 12-turn potentiometer with indicator (Pointer part: red backlight)(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted. |
| 耐振動性 | 10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 出力:出力操作 | Selectable either Light-ON or Dark-ON, with selection switch |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| 発光素子（変調） | Red LED |
| 出力:短絡保護 | Incorporated |
| 自動干渉防止機能 | Incorporated (Up to 4 sets of fiber heads can be mounted close together.)(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention. |
| 発光素子（変調）:ピーク発光波長 | 650 nm 0.026 mil |
製品説明
FX-311 Amplifier F. Optics, red led, NPN, 12-24 VDC, connector
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
