


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | - |
| 出力 | PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| 重さ | Net weight: 15 g approx.Gross weight: 70 g approx. |
| 詳細 | Standard type |
| 製品 | Digital Fiber Sensor |
| 材料 | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| アクセサリー | FX-MB1 (Amplifier protection seal): 1 set |
| 保護 | IP40 (IEC) |
| 部品番号 | FX-501P |
| 製品名 | Digital Fiber Sensor FX-500 Ver.2 |
| 応答時間 | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| 外部入力 | - |
| 製品番号 | FX-501P |
| 供給電圧 | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| タイマー機能 | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective |
| ケーブル延長 | - |
| さまざまな設定 | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| 消費電力 | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
| 周囲温度 | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| 感度設定 | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| 出力:出力ポイント | 1 point |
| 出力:出力操作 | Switchable either Light-ON or Dark-ON by L/D mode |
| タイマー機能:タイマー期間 | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| 発光素子(変調) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| CEマーキング指令への準拠 | EMC Directive, RoHS Directive |
| 出力:短絡保護 | Incorporated |
| 排出量設定機能 | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| 干渉防止機能 | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| 外部入力機能が可能 | - |
| 入射光強度表示範囲 | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| 外部入力(出力2と切り替え可能) | - |
技術仕様と性能データ
設置・操作ガイド